Multiplicate types:
RGB-7126 (7 series 12 channel, 6KW)
RGB-7186 (7 series 18 channel, 6KW)
RGB-7246 (7 series 24 channel, 6KW)
RGB-7243 (7 series 24 channel, 3KW)
RGB-7363 (7 series 36 channel, 3KW)
RGB-7483 (7 series 48 channel, 3KW)
Leading Performance:
· Intelligent jumper: dimmers can be configured to any DMX dimmer.
· Field lighting and beam-focusing: 6/12 channel digital lighting (the one whose proportion to the brightness value of DMX signal is bigger takes precedence), sets the brightness value of any channel freely; centralized control, turns on/ off self-
lighting freely.
· A/B independent DMX signal input which can be set such modes as singleness (A or B)/mix (the bigger one takes precedence)/back up (A takes precedence and switches automatically) and so on.
· Field backup: records DMX signal field, auto-programming field, deletes or runs the field.
· Lighting with programme control: adjusts the brightness of every channel through lighting knob of its own in a real time way while lighting, the speed can be adjusted through “↑”, “↓”.
· System status reporting: observes the rack and dimmer temperature, network input voltage, dimmer output voltage and current through algorism; observes lighting brightness (DMX signal value) by means of algorism, hex, channel list and so on;
observes the status of output circuit：OK/open/short.
· Over-temperature reporting and protection: reports emergencies when the rack temperature exceeds 80℃ or the dimmer temperature exceeds 60℃(can change the set value); protects itself automatically when the rack temperature exceeds 150℃or the dimmer temperature exceeds 80℃ (can start/close the function); output overflowing (short) protection which avoids dimmer burning to a largest degree.
· Lighting curve choosing: sets 12 kinds of lighting curve for customers to choose.
· Lighting rage: 0~100%.
· Fan automatic switching: opens when the temperature exceeds 50℃ (can also close the function)
· Provides A, B, C, D four kinds of output socket.
· Flight case with casters.
Technical Parameters:
Power supply：3 phases 4 wires, biphase or monophase power supply, with ground wire, monophase at 220 Volt±10%, 50Hz/60Hz
Control signal：DMX-512
Rated power: 6KW/channel or 3KW/channel
